Alpine INA-N033R, Руководство пользователя

Страница: 18 / 33

16
-EN
SETUP Operation
OK MODE Flipper switch
RTN SETUP
Changing Backlighting Colour
1
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select
ILLUMINATION. Press the OK button or MODE knob to
set.
3
Move the Flipper switch up or down and to select
GREEN or AMBER. Press the OK button or MODE
knob to set. The display returns to the SETUP screen.
NOTE
If you continue to press the Flipper switch to up or down, the
cursor position moves continuously.
4
Press the SETUP button to set the selected mode.
Sound (Beep) Guide Function
This function will give audible feedback with varying
tones depending upon the button pressed.
1
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select BEEP.
Press the OK button or MODE knob to set.
3
Move the Flipper switch up or down to select OFF or
set your preferred volume. The volume can be set one
of the three steps: LOW, MID, and HIGH. Press the
OK
button or MODE knob to set. The display returns to the
SETUP screen.
NOTES
•
The initial setting at the factory is BEEP OFF.
•
When an external audio processor is connected, the beep tone
does not function although the BEEP setting is set to on.
•
The beep tone will be output from the front speakers only.
4
Press the SETUP button to set the selected mode.
Displaying Time
1
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select CLOCK
DISPLAY. Press the OK button or MODE knob to set.
3
Move the Flipper switch up or down to change the
clock display ON or OFF. Press the OK button or
MODE knob to set. The display returns to the SETUP
screen.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
Setting Time
1
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select CLOCK
ADJUST. Press the OK button or MODE knob to set.
3
Move the Flipper switch up or down to select HOUR.
Press the OK button or MODE knob to set. Move the
Flipper switch up or down again to set the "Hour".
After adjustment, press the RTN button to return to the
previous indication.
4
Move the Flipper switch up or down to select
MINUTE. Press the OK button or MODE knob to set.
Move the Flipper switch up or down again to set the
"Minute".
After adjustment, press the
RTN button to return to the
previous indication.
5
When the setting is completed, press the SETUP
button to return to the normal mode.