background image

25

-EN

Installation

Installing the Main Unit

Caution

When you install this unit in your car, do not remove the

Detachable Front Panel.
If the Detachable Front Panel is removed during installation, you

might press too hard and warp the metal plate that holds it in place.

Caution

Do not block the unit's fan or heat sink, thus preventing air
circulation. If blocked, heat will accumulate inside the unit

and may cause a fire.

1

Slide mounting sleeve from main unit (see "Removal"
on this page). Slide the mounting sleeve into the
dashboard.

2

When your vehicle has the Bracket, mount the long hex
bolt onto the rear panel of the INA-N033R and put the
Rubber Cap on the hex bolt. If your vehicle does not
have the Mounting Support, reinforce the head unit
with the metal mounting strap (not supplied). Connect
all the leads of the INA-N033R according to details
described in the CONNECTION section.

NOTE

For the screw *, provide a proper screw to the chassis installing
location.

3

Slide the INA-N033R into the dashboard. When the
unit is in place, make sure the locking pins are fully
seated in the down position. This can be done by
pressing firmly in on the unit while pushing the locking
pin down with a small screwdriver. This ensures that
the unit is properly locked and will not accidentally
come out from the dashboard. Install the Detachable
Front Panel.

Removal

1

Remove the detachable front panel.

2

Use a small screwdriver (or similar tool) to push the
locking pins to the "up" position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.

3

Pull the unit out, keeping it unlocked as you do so.

Metal plate

Detachable
Front panel

Metal Mounting Strap

Screw

Bolt Stud

Hex Nut (M5)

INA-N033R

Lock pin

<JAPANESE CAR>

Front frame

Screws (M5 

×

 8)

(Included)

Mounting Bracket

INA-N033R

Dashboard

Rubber Cap
(Included)

Bracket

Mounting sleeve
(Included)

Hex Bolt
(Included)

INA-N033R

Air ventilation
hole

<Rear side>

Содержание INA-N033R


































Отзывы: