44
-EN
01GB05iLX-F309E.fm
ALPINE iLX-F309E 68-34732Z79-A (EN)
CAN-I/F Setup
[CAN-I/F]
is selected on the System Setup Menu screen in step 1. See
“System Setup” (page 42).
• CAN-I/F BOX should be connected before this operation.
Touch the Menu screen (page 18) to display the Info mode screen, and
then set the following.
Setting item:
Default Vehicle Screen
Setting contents:
Climate / Park sensor / Last mode (Initial setting)
• For details on the Vehicle Info mode screen, see “About Vehicle Interlock
Function” (page 72).
You can set the time displayed in the Climate screen.
Setting item:
Climate screen interrupt time
Setting contents:
None / 5 sec (Initial setting) / 10 sec / Continuous display
*
If you set the air conditioner, etc., while the Climate screen is displayed,
the screen will continuously be displayed.
• For details, see “About Vehicle Interlock Function” (page 72).
Set to “On” to display the Parking Assist screen if a vehicle detects an
obstacle.
Setting item:
Parking sensor interrupt
Setting contents:
Off / On (Initial setting)
• For details, see “About Vehicle Interlock Function” (page 72).
Unit Setup
[Unit]
is selected on the System Setup Menu screen in step 1. See
“System Setup” (page 42).
Make this setting when you use an external audio processor or AUX
distribution box.
When using an external audio processor, set to “On” (
).
Setting item:
External AP
Setting contents:
Off (Initial setting) / On
• When this setting is “On,” the Volume level is fixed at 10. Also, Balance/
Fader/Subwoofer Level/Subwoofer Phase/Bass/Treble/MX HD/EQ
Presets/Dual HD EQ/X-OVER/Time Correction/Defeat/Phone
Speaker/Default Sound Settings are set to “Off ” or “Flat” and cannot be
adjusted.
• Use the external AP to adjust volume.
Application Setup
[Application]
is selected on the System Setup Menu screen in step 1. See
“System Setup” (page 42).
Set Alpine TuneIt App to USB (iPhone) when an iPhone is connected, or
set to Bluetooth (Android) when an Android Smartphone is paired.
Setting item:
Alpine TuneIt App*
1
Setting contents:
Off / USB (iPhone) (Initial setting) / Bluetooth (Android)*
2
• Set this setting after closing the Alpine TuneIt App.
• For this function to work properly, specific applications must be
installed on your Smartphone before connection. Consult your Alpine
dealer or the Alpine website for details.
• Only the iPhone and certain Android Smartphones support this
function.
*1
Set this setting after closing the Alpine TuneIt App.
*2
Not displayed when Bluetooth is set to Off. For details, see “Bluetooth
Setup” (page 27).
Setting the Default Vehicle Screen
Setting the Climate Interrupt Time
None:
The Climate screen is not displayed when you adjust the
air conditioner, etc.
5 sec/10 sec*: The screen is displayed for 5 seconds/10 seconds, then
returns to the previous screen.
Continuous
display:
The Climate screen is continuously displayed.
Setting the Parking Sensor Interrupt On/Off
Setting the External AP
Off:
No Smartphone is connected.
USB (iPhone): When an iPhone is connected to the unit’s USB port, you
can programme the unit’s sound tuning parameters, or
communicate with SNS.
Bluetooth
(Android):
Set this when an Android Smartphone is paired with this
unit via Bluetooth technology. And after Bluetooth
Audio is connected, you can programme the unit’s
sound tuning parameters, or communicate with SNS.
01GB00iLX-F309E.book Page 44 Friday, December 22, 2017 2:38 PM
