Alpine i509-WRA-JL Скачать руководство пользователя страница 2

Jeep Wrangler

i509-WRA-JL

20220401v1

˜

 2/29

Forbidden

Indicates actions that are 

forbidden (must not be 

performed)

Forbidden

Indicates that disassembly is 

forbidden. 

Mandatory

Indicates actions that are 

mandatory (must be performed)

Marks content that should receive 

your full attention. 

 Warning

Do not disassemble or modify the product. 

Doing so could lead to an accident, fire, or 

electric shock.

Forbidden

Store screws and other small objects where 

children cannot reach them. If one of those 

small objects is swallowed, consult with a 

doctor immediately.

When replacing fuses be sure to

 use the fuses with the specified current

 rating. Failing to do so could lead to

 an accident or fire.

Forbidden

Only connect the product to a 12 VDC negative 

ground car. Failing to do so could lead to an 

accident or fire.

Mandatory

Since this vehicle has two batteries, discon-

necting the battery is not a good option. Take 

caution when testing circuits. Failing to do so 

could lead to electric shock or injury.

Do not cut the insulation on a cord and take 

power from another device. Doing so could 

lead to fire or electric shock.

Forbidden

Do not install the product in a location where 

it willl obstruct the driver’s forward view; 

interfere with the operation of the steering 

wheel, gear shift, or the like; or pose a threat 

to passengers. Doing so could lead to an ac-

cident or injury.

Forbidden

When making a hole in the vehicle body, be 

careful to avoid damaging pipes, the fuel tank, 

electrical wiring, and the like. This kind of 

damage could lead to an accident or fire. 

When installing and grounding the product, do 

not use any of the bolts or nuts of the steering 

wheel, brakes, fuel tank, or the like. Doing so 

could make the brakes stop working or could 

lead to fire.

Forbidden

Do not install the product near the passenger-

side airbag. Doing so could interfere with the 

operation of the airbag and lead to an acci-

dent or injury.

Forbidden

Bundle cords so that they don’t interfere with 

driving. Wrapping cords around the steer-

ing wheel, gearshift, brake pedal, or the like 

could lead to an accident or damage equip-

ment.

 Caution

Connect the product properly according to the 

instructions. Failing to do so could lead to fire 

or an accident.

Forbidden

Do not sandwich cords between the seat 

railing or allow them to touch protrusions. Re-

sulting breaks or shorts could lead to electric 

shock or fire.

Do not block vents or heat sinks. Doing so 

could lead to fire or damage equipment.

Use the accessories according to the instruc-

tions, and attach them securely. Failing to 

do so could lead to an accident or damage 

equipment.

Forbidden

Do not install the product where it may be ex-

posed to water or in a place with high levels 

of humidity or dust. Doing so could lead to fire 

or damage equipment.

Forbidden

The installation and wiring of this product re-

quires specialized skills and experience. Have 

the product installed by an Alpine authorized 

dealer.

Types of Precautions

Mandatory

Содержание i509-WRA-JL






























Отзывы: