41
-EN
Listening to DAB/DAB+/DMB
1
Press the
(HOME) button and select Radio
mode.
The display shows the Radio mode screen.
2
Touch [DAB ] to select a band.
Each touch changes the bands as follows:
DAB1 DAB2 DAB3 DAB1
• For
[FM ] or [AM ]
, see “Radio/RDS” (page 38).
3
Touch [
] repeatedly to select the tuning
mode.
Each time you touch, the Seek mode is switched.
Service PTY Preset Service
• This button displays the currently selected mode.
Service (Service Up/
Down) mode:
Service Components in the All
Service list will be switched.
PTY mode:
Service (Primary Component)
of the selected PTY will be
tuned in.
Preset (Preset UP/DN)
mode:
The Preset station will be
tuned in directly.
4
Touch [ ], [ ] to change the Service, PTY or
Preset up or down respectively.
Touch and hold to change the Service, PTY or Preset
continuously.
• The
,
buttons provide the same functions
above.
Presetting Service
1
Select the service and PTY, and then tune in a
desired service you wish to store in the preset
memory.
2
Touch and hold the Preset number you want
to store for at least 2 seconds.
The selected station is stored.
3
Repeat the procedure to store up to 11 other
stations onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
•
A total of 36 services can be stored in the preset memory.
(12 stations for each band; DAB1, DAB2 or DAB3).
•
If a preset memory has already been set in the preset
button, it will be cleared and the new station will be
memorized.
Tuning to Preset Service
You can tune in the preset stations in memory on either
band using its preset number.
Touch any one of the preset buttons that has a
service stored to it.
The preset service is received.
Service Component/PTY Search
Function
You can select your favourite Service Component from the
All Service list or PTY Search list.
Service Search Function
1
Touch [ ] (Search).
2
Touch [ ] (All).
All the currently available Service Component (Primary/
Secondary) lists are displayed.
3
Touch the desired Service Component.
The Selected service component is received.
•
A Secondary Service list that was derived from the Primary
Services is displayed in the Service Component list.
•
The TP indicator is displayed in the Service Component
(Primary) list currently being received.
•
The PTY is displayed in the Service Component (Primary) list
currently being received.
PTY Search Function
1
Touch [ ] (Search).
2
Touch [ ] (PTY).
3
Touch the desired programme type.
The Service Component list that corresponds with the
selected programme type is displayed.
4
Touch the desired Service Component.
The selected Service Component is received.
Содержание HALO 11
Страница 2: ...2 EN ...
