Alpine CVA-1006R страница 59 Скачать руководство пользователя

Страница: 59 / 70

-EN

MD (IVX-M706 only)

The MD could not be inserted.

• Another MD is already inserted.

- Eject the inserted MD and insert the MD.

• The MD is inserted incorrectly.

- Insert the MD correctly.

Sound skips due to vibration.

• Improper mounting.

- Securely re-mount the unit.

Sound skips without vibration.

• Dirty or scratched MD. Bad recording condition.

- Change the MD.

The play back won’t start.

• Dirty or scratched MD. Bad recording condition. A

non-recorded MD. Not a music MD.
- Change the MD.

• Dew condensation.

- Wait for a while before using.

The power turns on but the playback won’t start.

• The sound volume level of the head unit is adjusted to

minimum.
- Increase the sound volume of the head unit.

Indication for CD Player (IVX-C806 only)

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

• No CD is inserted.

- Insert a CD.

• Although a disc is inserted, “NO DISC” is displayed

and the unit does not start to play or eject the disc.
- Remove the disc by following these steps:
1) Press the

button.

The movable display will open.

2) Press the

button again for at least 3 seconds while

the movable display is open.

• Mechanism error.

1) Press the

button and eject the CD.

If not ejecting, consult your Alpine dealer.

2) When the error indication remains after ejecting,

press the

button again.

If the error indication still does not turn off after
pressing the

button for a few times, consult your

Alpine dealer.

NOTE

When the “ERROR” is displayed:
In case that the disc cannot be ejected by pressing the

button, press the RESET switch (refer to page 8) and press
the

button again.

If not ejecting, consult your Alpine dealer.

HI-TEMP

NO DISC

ERROR

Содержание CVA-1006R







































































Результаты поиска

Содержание CVA-1006R

Отзывы:

Похожие инструкции для CVA-1006R

Бренды по названию

Популярные бренды

Alpine CVA-1006R, Руководство пользователя

Результаты поиска

Содержание CVA-1006R

Отзывы:

Похожие инструкции для CVA-1006R

Бренды по названию

Популярные бренды