Alpine CDM-9825RB, Руководство по обслуживанию

Страница: 26 / 39

CDM-9825RB
No. Symbol I/O Terminal Description
47 CHG BUS IN I Signal input terminal from CD CHANGER BUS I/F.
48 CHG BUS OUT O Signal output terminal to CD CHANGER BUS I/F.
49 DISC IN SW I DISC insert detect SW input terminal.
50 CD SRQ I Communication request signal input terminal from Mechanism u-COM.
51 AVDD - Analog power supply terminal of A/D Converter.
52 AVREF 0 - Standard voltage input terminal of A/D Converter.
53 HI-TEMP I Temperature sensor signal (Thermistor) input terminal for CD.
54 NOSE ON I FRONT Panel detect signal input terminal.
55 S-METER I Signal Meter input terminal.
56 MULTIPATH I Multipath rejection detect terminal of receiving station.
57 ADJCH I Adjoining channel signal input terminal.
58 AFC I AFC signal input terminal.
59 NC(PULL-DOWN) - Pull-down connect terminal.
60 45W/60W SEL I 45W/60W set up input terminal.
61 AVSS - GND terminal of A/D Converter.
62
63
64 AVREF 1 - Standard voltage input terminal of A/D Converter.
65 RDS MONI RxD I Serial Data input terminal from RDS Monitor Soft (P/C).
66 RDS MONI TxD O Serial Data output terminal to RDS Monitor Soft (P/C).
67 FAN-CONT O FAN control signal output terminal. (H : FAN ON, L : FAN OFF)
CD STS I Status signal input termminal from Mechanism u-COM.
(RXD1) - (Flash-Pro II connect terminal by UART format.)
CD CMD O Command output terminal to Mechanism u-COM.
(TXD1) - (Flash-Pro II connect terminal by UART format.)
CD SCK O Serial Clock output terminal to Mechanism u-COM.
(ASCK1) - (Flash-Pro II connect terminal by UART format.)
71
I
75
76 AM SD I AM SD signal input terminal.
77 SSTOP I Seek Stop signal input terminal of TUNER.
78 NC - No connect terminal.
79 FM/AM O FM/AM power switching signal output terminal. (H : FM, L : AM)
80 DAVN I Available input terminal of RDS Decoder (SAA6588T).
81 RDS CONT O
MPX MUTE signal output terminal to RDS Decoder (SAA6588T) at FM adjoining
rejection.
82 IF MUTE O High Speed MUTE signal output terminal at AF SW.
83 ENCODER SEL(NC) - No connect terminal.
84 IN-INT I Outernal AUDIO signal input terminal.
85 OUT REM ON(NC)
86
I
98
99 A-MUTE O AUDIO MUTE signal output terminal. (L : MUTE ON)
100 GND - GND connect terminal.
No connect terminal.
68
69
70
NC -
NC
- No connect terminal. NC
- No connect terminal.
TO CONTENTS TO SCHEMATIC
- 30 -