26
-EN
01GB06CDE-9881R.fm
ALPINE CDE-9881R 68-08564Z05-A (EN)
Installation
•
The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
1
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
Remove the mounting sleeve from the main unit
(see “Removal” on page 27). Slide the mounting
sleeve into the dashboard and fix it with the metal
shackles.
Detachable
Front Panel
Less than 35°
Bracket
Rubber Cap
(Included)
Hex Bolt
(Included)
This unit
Dashboard
Mounting Sleeve
(Included)
Pressure Plates
*
2
When your vehicle has the Bracket, mount the long
hex bolt onto the rear panel of the CDE-9881R/
CDE-9881RB and put the Rubber Cap on the hex
bolt. If your vehicle does not have the Mounting
Support, reinforce the head unit with the metal
mounting strap (not supplied). Connect all other
leads of the CDE-9881R/CDE-9881RB according to
details described in the CONNECTIONS section.
•
For the screw *, provide a proper screw to the chassis installing
location.
∗
Metal Mounting Strap
Screw
Bolt Stud
This unit
Hex Nut (M5)
01GB00CDE-9881R.book Page 26 Monday, October 23, 2006 11:04 AM
