14
-EN
01GB05CDE-9881R.fm
ALPINE CDE-9881R 68-08564Z05-A (EN)
Order of files
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be what
is expected. Verify the writing order in the software
’
s
documentation. The playback order of the folders and files is as
follows.
* The folder No./folder Name will not be displayed if no file is
contained in the folder.
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA/AAC files.
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
Adjusting Bass/Treble/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Defeat
1
Press
AUDIO/RTN
repeatedly to choose the desired
mode.
Each press changes the mode as follows:
SUBW
*
BASS
TREBLE
BALANCE
FADER
DEFEAT
VOLUME
SUBW
Subwoofer : 0 ~ +15
Bass level: –7 ~ +7
Treble level: –7 ~ +7
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
•
If no operation is performed for 5 seconds after selecting the SUBW,
BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the unit
automatically returns to normal mode.
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2
Turn the
Rotary encoder
until the desired sound is
obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS
and TREBLE will return to the factory defaults.
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press
A.SEL
repeatedly to select the BASS mode.
BASS
TREBLE
HPF
BASS
Terminology
Root folder
Folder
MP3/WMA/AAC File
Sound Setting
BAND/TA
/ESC
SOURCE/
Rotary encoder
AUDIO/RTN/
LOUD
A.SEL
01GB00CDE-9881R.book Page 14 Monday, October 23, 2006 11:04 AM