33
-EN
EN
FR
ES
DE
IT
SE
NL
RU
PL
ALPINE CDE-205DAB 68-40368Z04-B (EN) 128x182
Messages
The following messages may appear or flash
during operation.
If these solutions do not help improve the
situation, consult your nearest Alpine dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.
CD ERROR:
The disc cannot be played. The disc
will be ejected automatically.
Clean or insert the disc correctly, or make sure
the disc is not blank or defective.
CD NO MUSIC:
There is no playable file. The disc
will be ejected automatically.
Insert a disc containing playable files (page
27).
CD PUSH EJT:
The disc could not be ejected
properly.
Press and hold (eject).
HUB NO SUPRT:
USB hubs are not supported.
INVALID
The selected operation could be invalid.
[USB MODE] cannot be changed during iPod
playback.
IPD STOP:
iPod playback has finished.
Operate your iPod/iPhone to start playback.
NO AF:
No alternative frequencies.
Press
/
while the program service
name is flashing. The unit starts searching for
another frequency with the same PI (program
identification) data ([PI SEEK] appears).
NO DATA
There is no DAB service for the selected
program type.
– Press
(back).
NO INFO
(no information)
There is no label information for the current
DAB service.
NO SERV
(no service)
The DAB signal cannot be received.
Perform an auto scan (page 13).
Check the connection of the DAB antenna
(aerial).
Check that [DAB ANT-PWR] is set to [ON] (page
22).
NO TP:
No traffic programs.
The unit will continue searching for available
TP stations.
NOT SUPPORT - ANDROID MODE
A USB device not supporting AOA (Android
Open Accessory) 2.0 is connected to the unit
while [USB MODE] is set to [ANDROID].
– Set [USB MODE] to [MSC/MTP] (page 22).
OVERLOAD:
The USB device is overloaded.
Disconnect the USB device, then press
SOURCE to select another source.
The USB device has a fault, or an unsupported
device is connected.
READ:
Now reading information.
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
RECEIVING
The DAB band is selected and the unit is
waiting to receive a service.
USB ERROR:
The USB device cannot be played.
Connect the USB device again.
USB NO DEV:
A USB device is not connected or
recognized.
Make sure the USB device or USB cable is
securely connected.
USB NO MUSIC:
There is no playable file.
Connect a USB device containing playable files
(page 27).
USB NO SUPRT:
The USB device is not
supported.
For details on the compatibility of your USB
device, consult your nearest Alpine dealer.
orts the
er a call
e, the time
he time.
e.
er) for
nit on
kers
ar phone,
ound
r an
on.
with the
