12
-EN
ALPINE CDE-205DAB 68-40368Z04-B (EN) 128x182
Receivi
1
After s
numb
Searchi
You can d
searching
1
Press
servic
2
Rotate
desire
Recept
To exit th
Press
Setting
If you ena
announce
selected s
1
Press
secon
[GENE
2
Rotate
ANNO
3
Rotate
[ANNO
then p
Note
During a DA
the level set
Connecting a USB Device
1
Turn down the volume on the unit.
2
Connect the USB device to the unit.
To connect an iPod/iPhone, use the USB
connection cable for iPod (not supplied).
Connecting Other Portable Audio
Device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect the portable audio device to the
AUX input jack (stereo mini jack) on the
unit with a connecting cord (not
supplied)*.
* Be sure to use a straight type plug.
4
Press SOURCE to select [AUX].
To match the volume level of the
connected device to other sources
Start playback of the portable audio device at a
moderate volume, and set your usual listening
volume on the unit.
Press and hold
/SETUP for at least 2 seconds,
then select [AUDIO] [AUX VOL] (page 23).
Listening to the Radio
Listening to the Radio
To listen to the radio, press SOURCE to select
[TUNER].
When the DAB band is selected for the first time
after replacing the car battery or changing the
connections, the initial scan starts automatically.
Allow the initial scan to finish. (If interrupted, the
initial scan will start again the next time you
select the DAB band.) If no DAB station is stored
by the initial scan, perform an auto scan (page
13).
Tip
Set [DAB ANT-PWR] to [ON] (default) or [OFF] depending
on the type of DAB antenna (aerial) (page 22).
Receiving DAB
DAB (Digital Audio Broadcasting) is a
transmission system on terrestrial networks. DAB
stations bundle radio programs (“services”) into
an ensemble, and each service contains one or
more components. The same service can
sometimes be received on different frequencies.
Searching for a service manually
1
Press
/A.ME to select [DB1], [DB2] or
[DB3].
2
Press
/
to search within an
ensemble for a service; press and hold
/
to search for different
ensembles.
Scanning stops when the unit receives a
service/ensemble. Search until the desired
service is received.
Storing a service manually
1
While receiving the service that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
