14
-EN
ALPINE CDE-205DAB 68-40368Z04-B (EN) 128x182
Local Lin
This funct
stations in
your num
During FM
to 6) on w
seconds, p
local statio
local statio
Selectin
Use PTY to
program t
1
Press
progra
If you p
the list
If you r
service
switch
2
Rotate
progra
The un
broadc
Type of p
NONE
(N
AFFAIRS
SPORT
(S
(Drama),
VARIED
(
(Rock Mu
(Light cla
OTHER M
FINANCE
program)
(Religion
LEISURE
(Country
OLDIES
(
DOCUME
* May appe
reception
Using FM/MW/LW
Storing automatically
1
Press
/A.ME to change the band (FM1,
FM2, FM3, MW or LW).
2
Press and hold
/A.ME for at least 2
seconds.
The unit stores stations in order of frequency
on the number buttons.
Tuning
1
Press
/A.ME to change the band (FM1,
FM2, MW or LW).
2
Perform tuning.
To tune manually
Press and hold
/
to locate the
approximate frequency, then press
/
repeatedly to fine adjust to the desired
frequency.
To tune automatically
Press
/
.
Scanning stops when the unit receives a
station.
Storing manually
1
While receiving the station that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
Receiving the stored stations
1
Select the band, then press a number
button (1 to 6).
Using Radio Data System (RDS)
Setting alternative frequencies (AF)
and traffic announcement (TA)
AF continuously retunes the station to the
strongest signal in a network, and TA provides
current traffic information or traffic programs
(TP) if received.
1
Press and hold
/SETUP for at least 2
seconds, rotate the control dial to select
[GENERAL], then press it.
2
Rotate the control dial to select [AF/TA],
then press it.
3
Rotate the control dial to select [AF ON],
[TA ON], [AF/TA ON] or [AF/TA OFF], then
press it.
To store RDS stations with the AF and TA
setting
You can preset RDS stations along with an AF/TA
setting. Set AF/TA, then store the station
automatically or manually. If you preset
manually, you can also preset non-RDS stations.
To receive emergency announcements
With AF or TA on, emergency announcements
will automatically interrupt the currently
selected source.
To adjust the volume level during a traffic
announcement
Level will be stored into memory for subsequent
traffic announcements, independently from the
regular volume level.
To stay with one regional program
(REGIONAL)
When the AF and REGIONAL functions are on,
you will not be switched to another regional
station with a stronger frequency. If you leave
this regional program’s reception area, set
[REGIONAL OFF] in [GENERAL] during FM
reception (page 22).
This function does not work in the UK and some
other areas.
