22
-EN
01GB05CDA9883E.fm
ALPINE CDA-9883E 68-08564Z12-A (EN)
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Press
SOURCE/
to switch to the MP3 Changer
mode.
2
Press any one of the disc
select buttons
(1 through 6)
corresponding to one of the discs
loaded in the CD Changer.
3
To pause playback, press
/
/
ENT
.
Pressing /
/
ENT
again will resume playback.
•
The unit can play discs containing both audio data and MP3 data.
•
For operating MP3 with an MP3 compatible CD Changer, refer to
“CD/MP3/WMA/AAC” pages 9 to 12.
Multi-Changer Selection (Optional)
Alpine’s Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you can
connect up to 4 CD Changers. If you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1
Press
SOURCE/
on this unit to activate the CD
Changer mode.
Alternatively, press
SOURCE
on the remote control
(RUE-4202) to activate the CD Changer mode.
2
Press
BAND
on this unit or the RUE-4202 to activate
the CD Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds.
3
Press
BAND
until the desired CD Changer indicator
appears on the display.
Alternatively press
BAND
on the Remote Control until the
desired changer indicator appears on the display.
•
If the selected CD Changer is not connected, the display will show
“NO CHANGER - (No.)”.
•
To operate the selected changer, see “CD/MP3/WMA/AAC” (pages 9
to 12).
•
For further details about the external input (AUX) when using
KCA-410C, see “Setting the AUX Mode (V-Link)” on page 18.
Controls on Remote Control
Source Button
Press this button to select the audio source.
Volume Adjustment Buttons
To increase the volume level:
Press the
button
To decrease the volume level:
Press the
button
Button
Radio mode: Pressing this button will select, in ascending
order, stations programmed into the radio’s presets as
shown below.
...
CD Changer mode: DISC Select (UP) button
Press this button to select a disc in ascending order.
MP3/WMA/AAC mode: Folder Select (UP) button
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (UP) / DISC Select (UP) button
Press this button to select a folder in ascending order. Press
and hold this button to select a disc in ascending order.
iPod mode: Switches Playlist/Artist/Album.
DN Button
Radio mode: SEEK (DN) Button
CD/iPod mode: Press this button to go back to the
beginning of the current track.
/
Button
Press this button to switch between the Play and Pause
modes for CD.
Audio Processor Button
Press the button to call the external audio processor mode
when the external audio processor is connected
*
1
.
*
1
For the operation of external audio processor, refer to the Owner’s
Manual of the external audio processor you purchased.
Power Button
Press this button to turn the power on/off.
SOURCE
BAND
Remote Control
01GB00CDA9883E.book Page 22 Tuesday, December 26, 2006 6:42 PM
Содержание CDA-9883E
Страница 33: ......
