Alpine 9ZUA147, Руководство пользователя

Страница: 28 / 111

28
-EN
Setup Operation
1
Press the MENU button.
The Menu screen is displayed.
• You can also display the menu screen, by touching [ ]
on the lower part of the Audio source screen or by swiping upward.
2
Touch [Setup] .
The Setup main screen is displayed.
3
Touch the required setting icon on the upper part of the
Setup main screen or swipe the list area vertically, then
touch the setting item.
Setting items:
Wireless: See “Wireless (Bluetooth) Setup” (page 29).
General: See “General Setup” (page 31).
Source: See “Source Setup” (page 41).
System: See “System Setup” (page 44).
Setup
To display the Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
2 Release the parking brake. (For safety, release the parking
brake while depressing the foot brake pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the Setup operation has been released.
Engaging the parking brake can reactivate the Setup Menu, as long as
the car’s ignition has not been turned off. It is not necessary to repeat
the above procedure (1 through 3) of “To display the Setup Menu
screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Setup Menu screen.”
[Setup] button