Alphatech Brave series, Руководство пользователя и обслуживания, Страница: 28 / 53

28
BRAVE SlimDP
– User and service manual
Example:
1 relay switch on internal code 48
– is programmed 35148 ♫
2 relay switch on internal code 8 - is programmed
352*8 ♫
By choosing no 8 on the phone we switch on just the second relay, with option 48 we
switch on both relays
Note: second relay is in SlimKey module, works only if is SlimKey connected.
Parameter Value Meaning Basic
36 r cc
command aa from phone for switching
relay r 2 impulses (00-99,*0-*9)
150 260
r
– relay number relay number [1 in SlimDP]
cc
– command (internal code) for switching on the relay from the phone [2
spaces]/
1
To set the same command for both relays (internal code) so that both relays
activate at the same time
/
1
– command is always 2 digits, but if you wish to control relay with a single
digit from the phone, there is an option to input " *a ", where a is a single number
and the star represents an empty space and must be in the first place.
Switching a relay on with 2-impulses is used for sliding gates replacing a gate
entry.
Example:
Command for switching on 1
st
relay 1 impulse is for example *8 , the command for
disconnection is *8 and the command for switching on 1
st
relays 2 impulses is *9 .
Programming: 351*8
♫ ,
431*8
♫ ,
361
*9 ♫
.
If you are in conversation with the Brave, the command to open a gate would be button
9 , the first impulse starts and the gate opens, the second impulse stops it, the time the
gate is opened "opened space" is set by time between the impulses ( parameter 30 )
after people enter press 8 , then Brave makes 1 impulse and disconnects, gate closes.
Parameter Value Meaning Basic
37 r ss
time ss [sec] of relay r on for time t1
(01-99)
105 205
r
– relay number relay number [1 in SlimDP]
ss
– time t1 for which relay 1 is switched on [2 spaces 00-99], where time
00 means 0,5sec