20
041-036-B000-001, Rev. A (07/2013)
2.13 Stopping the Engine
To stop the engine in an emergency
Push the engine switch on the control panel to the OFF position.
•
In an emergency, pushing the engine switch on the control panel to the “OFF” position will automatically stop the
engine with or without a load. However, repeatedly stopping the generator without disconnecting all loads can
cause damage to the generator or equipment.
•
Continually stopping the generator with a load applied can lead to damage of the control module.
CAUTION!
Normal Shutdown
1. Turn off the connected equipment and disconnect from the generator.
2. Push the engine switch to the OFF position.
3. Turn the fuel valve to the OFF position.
2.0 Operation
Circuit Breaker
120V AC 20A
NEUTRAL FLOATING
NEUTRE FLOTTANT
DC 12V 8.3A
SYSTEM FLOATING
SYSTÈME FLOTTANT
OFF
ON
OVERLOAD
RUN
LOW OIL
Engine Switch
Figure 2-12, Engine Switch Location
