Power Pong
User Manual
Page 8
2.4
Connecting the Throwing Head Communication Cable
1.
Plug the communication cable coming from the throwing head assembly to the 15-pin
connector found on top of the robot Base (Photos 2-12, 2-13 and 2-14).
2.
Tighten (snug) the two thumb screws on the cable connector.
Note:
This cable
MUST
be
disconnected anytime you swing the table support legs back into their transport position to
prevent damage to the cable.
2.5
Fully Opening the Collection Net
1.
Standing behind the robot, grip the top points of the net and completely fold the net down
on both sides until the net fully opens (Photo 2-15).
Photo 2-13
Photo 2-12
Photo 2-14
Photo 2-15
