Alpha EM DC 6000, Руководство по эксплуатации

Страница: 43 / 48

For energy output in kWh
Pulse Rate
Divisor Pulse Channel Power
1
1per Whr Up to 3600W
1per kWhr
10
1per 10Whr Up to 3600W
1per 10kWhr
100
1per 100Whr Up to 3600W
1per 100kWhr
1000
1per 1000Whr Up to 3600W
1per 1000kWhr
Pulse Rate
Divisor Pulse Channel Power
1
1per kWhr Up to 3600kW
1per MWhr above 3600kW*
8.2 Pulse Output
Pulse Output is the potential free, very fast acting relay
contact which can be used to drive an external mechanical
counter for energy measurement. The Pulse Output can be
configured to any of the parameter shown in table-7
through setup parameter screen.
on delay off delay
repeat N times
Relay energised
Relay de-energised
time
De-energized configuration
8.3 Timer Output
Timer output can be used to operate the Relay in a
cyclic manner.
The user can define the ON period and OFF period and
also the number of times this cycle is to be repeated.
The number of Cycles (N) can be indefinite or 1 to 9999.
The counting is shown on a measurement screen as
explained before.
on delay off delay
repeat N times
Relay energised
Relay de-energised
time
Energized configuration
Pulse Rate
Divisor Pulse
1 1per MWhr
For energy output in Wh
*Applicable to 61...200V and 201...1000V model
Note : Energy Output changes from
Wh to kWh if system power > 60kW
TABLE : 9
Up to 60kW
Up to 60kW
Up to 60kW
Up to 60kW
For energy output in MWh
41