Alpha EM DC 6000, Руководство по эксплуатации

Страница: 35 / 48

St M
K
Old Imp Exp Dmd W A V hr Old Imp Exp Dmd W A hr Old Imp Exp Dmd W A hr
St M
K
Old Imp Exp Dmd W A V hr Old Imp Exp Dmd W A hr Old Imp Exp Dmd W A hr
7.4 Reset Parameter Selection
This screen allows user to reset various stored parameters.
When reset is performed, current register values are
moved to corresponding "old" registers. The different reset
parameters are listed below. The below screens shows the
actual reset parameter screen & the parameter that is to be
selected for reset operation. i.e. hr - Run and On Hour.
7.5 Output Parameter Selection
In this menu the user can configure different output
available from the meter. The display text on this screen is
shown below.
7.5.1 Select Relay Output
On this screen the user can select relay as the output
option and can decide which of the available relay to be
used for his/her application. Number of available relays
depend on the order code (see datasheet for more
information).
On selecting a relay,(As shown in screen 1) the user will
be taken to the type selection screen,(As shown in screen
2) which prompts him to select a relay function out of
seven available. The options are as following.
1) None
2) Limit
3) Pulse
4) Timer
5) Remote
6) Reverse Lock
7) RTC relay
The option "none" implies that the relay is disabled.
7.5.1.1 Limit Relay Configuration
These parameters will decide the operation of limit relay.
7.5.1.1.1 Limit Parameter
This screen enables user to assign any one out of
available options for limit relay. The explanation of these
options is given in Table-8.
7.5.1.1.2 Limit Configuration
This screen allows the user to select relay configuration
out of 4 available options.
1) Hi-E
2) Hi-d
3) Lo-E
4) Lo-d
St
M
K
Old Imp Exp Dmd W A V hr Old Imp Exp Dmd W A hr Old Imp Exp Dmd W A hr
St M
K
Old Imp Exp Dmd W A V hr Old Imp Exp Dmd W A hr Old Imp Exp Dmd W A hr
St M
K
Old Imp Exp Dmd W A V hr Old Imp Exp Dmd W A hr Old Imp Exp Dmd W A hr
St M
K
Old Imp Exp Dmd W A V hr Old Imp Exp Dmd W A hr Old Imp Exp Dmd W A hr
St
M
K
Old Imp Exp Dmd W A V hr Old Imp Exp Dmd W A hr Old Imp Exp Dmd W A hr
nonE
Parameter
None
All
Run Hour and On Hour
Number of Interrupts
High Voltage & Current
Low Voltage & Current
Energy
Demand
Ampere Hour
Time Based Log
Load Profile Log
Para Code
ALL
hr
intr
hi
Lo
En
dmd
Ah
t.Log
LoAd
33