Alpha ECOGRDCW, Инструкция по эксплуатации, Страница: 9 / 16

9
INSTallaTION Of ThE DuST COllECTION COVER
WaRNING!
1. be sure to turn off the high-speed angle grinder and remove the plug
from the electrical outlet before attaching and installing the Dust Col-
lection Cover.
2. Make sure the Dust Collection Cover is securely attached; otherwise it
may come loose which could cause injury.
3. If you installed the Dust Collection Cover to a high-speed angle grinder
but the connector is loose and can not be securely attached, do not use
the Dust Collection Cover. using it in this state could cause injury.
INSTallING TO alPha
®
OR MaKITa
®
hIGh-SPEED aNGlE GRINDER
1. Dismantle the original safety guard and
diamond cutting wheel from the high-
speed angle grinder.
2. loosen the connector setting screws in the
Dust Collection Cover and leave loose.
3. attach the connector to the wheel guard
mount of the high-speed angle grinder.
adjust the angle of the Dust Collection Cover
when attaching. (fig. 1)
4. using a Phillips screwdriver, tighten the two
setting screws securely. (fig. 2)
CauTION!
This Dust Collection Cover is solely designed for application with diamond
wheel. Do not use with any other type of tool such as a conventional abrasive
cut-off wheel or carbide tip saw blade.
(fig.1)
(fig.2)