Alpha ECOGRDCW, Инструкция по эксплуатации, Страница: 10 / 16

10
INSTallING TO OThER hIGh-SPEED aNGlE GRINDERS WITh
INCluDED OThER CONNECTORS
If you install the Dust Collection Cover to a high-speed angle grinder but the
connector is loose and cannot be securely attached, it may be necessary to
change the connector designed for other makes.
1. using the hexagon Wrench, remove the three bolts in the connector
attached to the Dust Collection Cover. (fig. 3)
2. attach the supplied connector by following the instruction in (1) above
in reverse. (for hitachi Grinder use Part No: 500003/ for Metabo / bosch
use Part No: 500004)
3. Subsequent procedures are the same as for attaching the adapter to a
high-speed angle grinder in case changing the connector is not needed.
(fig.3)
bolt
Connector