Alpha ECOGRDCW, Инструкция по эксплуатации, Страница: 12 / 16

12
3. Mount the supplied spacer with the power tool or dedicated flange lock
nut set on the spindle and then mount the diamond wheel. (fig. 6)
4. Mount the inner flange on the spindle on top of the diamond wheel with
the convex side of the inner flange on the diamond wheel side.
5. Press the lock pin to fix the spindle and securely tighten the lock nut
with a pin wrench.
6. Replace the Dust Collection Cover (fig. 4) and tighten the knob (a).
aDjuSTING ThE CuTTING DEPTh
1. loosen knob (b) on the Dust Col-
lection Cover. (fig. 7)
2. Slide the base plate to adjust the
cutting depth and tighten knob
(B) to fix the depth. (Fig. 8) Match
the base plate matching surface
to the scale to determine the ap-
proximate cutting depth. (fig. 9)
Spacer:
hitachi: 500011
Metabo
®
: 500012
(fig.7)
(fig.8)
(fig.6)
lock Nut
Diamond
Wheel
Inner
flange
Knob (b)
base Plate