18
C048-781-30 R01, Rev. B (01/2020)
5.5.4
5.5.4 Information
Information
This screen displays system information about controller and
temperature sensors.
Cont = Controller internal temperature sensor. 1-4 are
reserved for optional external temperature sensors.
5.6
5.6 Advanced
Advanced
To access advanced settings from the home screen, press the
Settings icon, then press Advanced.
5.6.1
5.6.1 Raw Data
Raw Data
This screen displays raw data for load status, breaker status,
and temperature.
5.6.2
5.6.2
Configuration
Configuration
This screen allows the removal of busses and modules
from system monitoring. Busses with at least 20V cannot
be removed from configuration. Modules and busses are
automatically inventoried if data is being received by the
controller.
5.6.3
5.6.3 Test Modes
Test Modes
This screen allows the user to test the major alarm relay and
onboard audible alarm. Exiting the menu will automatically turn
off the relay.
Note: if a major alarm is present on the system, the major
alarm test feature will not operate.
5.6.4
5.6.4 Restore Defaults
Restore Defaults
This screen allows the user to restore:
y
Bus calibration
y
Load calibration
y
Breaker ampacity
y
Brightness/buzzer
y
Breaker inventory
y
Breaker alarm threshold
Figure 25. System
Information
Figure 26. Raw Data
Figure 27. System
Configuration
Figure 28. Test Modes
Figure 29. Restore
Defaults
