manualshive.com logo in svg

Alpha AWS-125, Инструкция по эксплуатации, Страница: 4 / 32

Поделиться
Скачать
Alpha AWS-125 Скачать руководство пользователя страница 4

4

Note:    In some situations, failing to observe WARNING notes could result in  death or 

serious personal injury.  Be sure to read and observe the safety notes to ensure 
safe and correct use of the wet stone cutter.  

  

CAUTION!

The following are important notes for products, operation, and maintenance applicable to 
this stone cutter.

SAFETY INSTRUCTIONS  

Read all these instructions before attempting to operate this product.

  

WARNING!

When using electric tools, basic safety precautions should always be foll

owed to reduce the 

risk of fi re, electric shock, and personal injury, including the following.

For Safe Operation

1.

 

Keep work area clean

 

Cluttered areas and benches invite injuries.

2.

 

Consider work area environment

 

Do not expose power tools to rain. Do not use power tools in damp or wet locations 
without GFCI protection.  Keep work areas well lit. Do not use the tool in presence of 
fl ammable liquids or gases.

3.  Guard against electric shock

 

Prevent body contact with grounded surfaces. For example: pipes, radiators, ranges, 
and refrigerator enclosures; use grounded outlets. 

4.  Keep children and visitors away

 

Do not let visitors contact tool or extension cord.  All visitors should be kept away from 
work area.  Keep out of reach of children.

5. Tool 

Storage

 

When not in use, tools should be stored in a secure dry location. A locked storage area 
or high shelf out of children’s reach is ideal.

6.  Do not force the tool

 

It will do the job better and be safer at the rate for which it was intended.

7.  Use the right tool

 

Do not force a small tool or attachment to do the job of a heavy-duty tool.  Do not use 
the tool for purposes it is not designed for – (for example – do not use stone cutter for 
cutting tree limbs or logs.)

8. Dress 

properly

 

Do not wear loose clothing or jewelry. Items such as these can be caught in moving 
parts.  Rubber gloves and non-skid footwear are recommended when working outdoors. 
Wear protective hair covering to contain long hair.

9.  Use safety equipment

 

Always wear safety glasses and if necessary, a face shield, dust mask and hearing 
protection.

Содержание AWS-125

































Отзывы:

Нет отзывов