Alpha tools SBM 1000 E, Оригинальная инструкция по эксплуатации

Страница: 12 / 136

12
GBR
Important!
When using equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read
the complete operating manual with due care. Keep this
manual in a safe place, so that the information is
available at all times. If you give the equipment to any
other person, give them these operating instructions as
well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.
1. Safety regulations
The corresponding safety information can be found in
the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or
serious injury.
Keep all safety regulations and instructions in a safe
place for future use.
2. Layout and items supplied (Fig. 1)
2.1 Layout
1. Drill chuck
2. Drill depth stop
3. Drill/hammer drill selector switch
4. Locking
button
5. ON/OFF switch
6. Clockwise/Counter-clockwise switch
7. Additional handle
8. Speed controlle
2.2 Items supplied
Open the packaging and take out the equipment
with care.
Remove the packaging material and any packaging
and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect the equipment and accessories for transport
damage.
If possible, please keep the packaging until the end
of the guarantee period.
IMPORTANT
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or
small parts. There is a danger of swallowing or
suffocating!
Electronic Hammer Drill
Drill depth stop
Additional handle
Original operating instructions
Safety instructions
3. Proper use
The drill is designed for drilling holes into wood, iron,
non-ferrous metals and rock using the appropriate bits.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for
equivalent purposes.
4. Technical data
Mains voltage: 230V ~ 50 Hz
Power input: 1010 W
Idling speed: 0-3000 rpm
Drilling capacity Concrete 13 mm
Steel 10 mm
Wood 25 mm
Protection class: II /
쓑
Weight: 2.3 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Sound pressure level, L
pA
97,5 dB(A)
Uncertainty K
pA
3 dB
Sound power level L
WA
108,5 dB(A)
Uncertainty K
WA
3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Anleitung_SBM_1000_E_SPK7:_ 18.07.2011 15:19 Uhr Seite 12