User Manual: revA_3521
Page
19
of
24
4.3.2.2
Structure and electrical installation
1.
Get the cabinet ready and assemble it as integrator requested to ensure the cabinet is
installed horizontally and reasonable location layout;
2.
Prepare all the battery packs, place the batteries on the cabinet tray via manual-lifter, and
push the batteries into the cabinet, then fix the battery mounting ears to the cabinet through
the crown-nuts;
3.
Please double check the battery is in shut down and disconnect the circuit breaker, unscrew
the positive/negative terminal bolts of the battery pack, then connect the batteries to the
positive/negative bus bar through cables;
4.
Unscrew the grounding screw, connect the battery and the grounding bus bar of cabinet
through the yellow-green flexible wire to ensure that all connections are reliable
5.
Connect the CAN communication interface between the batteries, set the dial switch address
as Table 3-5, and insert the matching resistance terminal into the CAN port at the end of
battery, as
Figure 4.
Figure 4. Wiring example for parallel connection
Содержание AOESS48V-LFP4100
Страница 1: ......
Страница 26: ...User Manual revA_3521 Page 25 of 24...
