11
Adjustable Parameters
Parameter Adjustment Procedure
1.Press the PIC button on the remote
Each time the PIC button is pressed, the adjustment cycles from “BRIGHT’ to
“CONTRAST,and the to “COLOR”
2. To adjust brightness, contrast and color
Press the (
34
) buttons on the remote to adjust
3. Exit Picture Quality Setting Mode:
Press the PIC button on the remote.
Parking Brake Inhibit
1. The display on the TFT monitor will display video only when the vehicle is
stopped and the parking brake is applied.
2. Parking brake function is overridden when the video source is set to
CAMERA.
3. When the "parking brake inhibit" is active, the front monitor displays
"Caution" with blue background, preventing the driver from watching video
while driving to reduce the risk of a traffic accident. Rear video screens are not
affected.(if connected,
not included
)
See installation guide for proper wiring of the parking brake inhibit feature
NOTE:
There must be a video signal present on the AUX or
CAMERA input to adjust the above settings.
