17
ASP (Audio Signal Processing) Settings
Enter the ASP setup program menu by touching
ASP.
The ASP Settings menu allows you to make fine audio adjustments.
ASP settings have four sub-menu settings: Bass, Treble, Subwoofer
crossover frequency and Bass Q factor. See picture below:
Bass Frequency:
Touch Bass Freq to open adjust screen
60Hz, 80Hz, 100Hz,200Hz adjustment points Depending on the audio source,
select the Bass Center Frequency to achieve the best Bass effect.
Treble Frequency:
Touch Treble Freq to open adjust screen
10KHz,12.5KHz,15KHz,17.5KHz adjustment points Depending on the audio
source, select the Treble Center Frequency to achieve the best Treble effect.
Sub Filter:
Touch Sub Filter to open adjust screen
80HZ, 120HZ, 160HZ adjustment points. Selecting a crossover frequency sets
a cut-off frequency of the subwoofers LPF (low-pass filter). This adjustment is
only available when using the subwoofer line level output. It will not effect any
speakers connected to the internal amplifiers in the unit.
Bass Q-Factor:
Touch Bass Q-Factor to open adjust screen
When the Bass Center Frequency is selected, adjusting the Bass Q-Factor
alters the sharpness of the Bass output
To exit the A.S.P. Settings menu, press the home icon in the upper left
corner of the LCD display
