DEU
ENG
FRA NDL ITA ESP DAN/NOR
FIN
SWE POL RUS
21
Commissioning
Alpha IP WRC2 61001
5 Commissioning
5.1 Teach-in of the device
Prior to operating the WRC 61001, it must be integrated into the Alpha
IP building automation system via the Access Point (HAP 21001). For this,
teach-in the device as follows.
Ö
The Alpha IP Access Point has been set-up via the Alpha IP app (see
manual HAP 21001).
1. Open the Alpha IP app on your smart phone.
2. Select the menu item
Teach-in device
.
3. Pull the wall mount switch from the interchangeable frame (see fig. left).
4. Remove the insulating strip from the battery compartment. The teach-
in mode is automatically activated for three minutes.
The teach-in mode can be activated manually with the system key (see
„Device overview“ page 20) for a duration of 3 minutes.
5. The device will be displayed automatically in the Alpha IP app.
6. For confirmation, enter the last four digits of the device number (SG-
TIN) or scan the supplied QR code. The device number can be found
below the QR code or in the battery compartment.
The LED will light up in green after a successful teach-in process. The
process must be repeated if the LED lights up in red.
7. Follow the directions of the Alpha IP app.
