Alpha IP RTD 61001 Series, Руководство пользователя

Страница: 56 / 164

Restoring the factory settings
56
ESP
NDL
ENG
IT
A
FRA
DEU
10 Cleaning
Clean the device with a soft, clean, dry, and lint-free cloth. In order to remove heavy
contamination, moisten the cloth slightly with lukewarm water. Use a solvent-free
detergent for cleaning.
11 Restoring the factory settings
The reset to factory setting will delete all settings made by the user.
Alpha IP Access Point (app)
Ö
The device is within the radio range of the Alpha IP Access Point.
1. Ensure that the device is active.
2. Delete the device from the app.
Stand-alone operation
1. Take off the device from the installation bottom (see fig. 3 page 5).
2. Remove the batteries.
3. Re-insert the batteries according to the marking in the battery compartments.
At the same time press the system key (C) for 4 seconds until the LED flashes
rapidly in orange.
4. Release the system key (C).
5. Press the system key (C) again for 4 seconds until the LED lights up in green.
6. Release the system key (C) again.
9
The device restarts.
9
The factory settings are restored.