ENG
NOR
SWE
DA
N
FIN
POL
RU
S
13
ENG
For a standalone operation, the teach-in of the Alpha IP Multi-IO Box station must be performed via the
Alpha IP base station (FAL 21001/41001). Teach-in the device as follows:
1. Press the System key at the Alpha IP base station repeatedly, until the LEDs of all heating zones light
up in green.
2. Press the System key (A) of the Alpha IP base station for 4 seconds, until the LED of the System key
flashes rapidly in orange.
9
The teach-in mode is active for three minutes.
3. Press the System key (A) of the Multi-IO Box for 4 seconds, until the LED of the System key flashes
in orange.
The System key LED will light up in green after a successful teach-in process. The process must
be repeated if the LED lights up in red.
7.2 Teach-in to Alpha IP Access Point
The Alpha IP Multi-IO Box can be taught in to the Alpha IP Access Point as well as to the
Homematic Central CCU2.
For a control via the Alpha IP app, the teach-in of the Alpha IP Multi-IO Box must be performed via the
Access Point (HAP 21001). Teach-in the device as follows:
Ö
The Alpha IP Access Point has been set-up via the Alpha IP app (see manual HAP 21001).
1. Open the Alpha IP app on your smart phone.
2. Select the menu item
Teach-in device.
3. Press the System key (A) shortly until the LED flashes slowly in orange. The teach-in mode is active
for three minutes.
9
The device will be displayed automatically in the Alpha IP app.
4. For confirmation, enter the last four digits of the device number (SGTIN) or scan the supplied QR
code. The device number can be found below the supplied QR code or directly on the device.
The System key LED will light up in green after a successful teach-in process. The process must
be repeated if the LED lights up in red.
5. Follow the directions of the app.
Commissioning
