background image

8

Subject to technical amendments without notice  |  83059700iUK – Translation of the original operating manual |  ait-deutschland GmbH

5  Delivery, storage, transport 

and installation

5.1  Scope of supply

 

Check delivery immediately after receipt for 

externally visible damage and completeness.

 

Notify supplier of any defects immediately. 

The accompanying parts package contains

 

The wall-mounted controller and the outdoor 

sensor as an accompanying package. The box 

with these parts is in the free space in front of the 

condenser

 

A mailing envelope with 4 anti-slip mats for setting 

down is attached to the outside of the device

5.2  Storage

 

Do not unpack the unit until directly before 

installation at the installation location. 

 

Store unit protected against

 

Moisture/damp

 

Frost

 

Dust and dirt

5.3  Transport and unpacking

Notes on safe transport

The device is heavy (

 

"Technical data / scope 

of supply", page 17). There is a risk of injuries or 

damage to property if the device falls or overturns.
There is a risk of cutting your hands on sharp edges of 

the device.

 

Wear cut-resistant protective gloves.

The hydraulic connections are not designed for 

mechanical loads.

 

Do not lift or transport the device by the hydraulic 

connections. 

4  Operation and care

 NOTE

The device is operated via the control panel 

of the heating and heat pump controller 

(

 

operating manual for the heating and 

heat pump controller).

4.1  Energy and environmentally 

conscious operation

The generally accepted requirements for energy 

conscious and environmentally conscious operation of 

a heating system also apply to the use of a heat pump. 

The most important measures include:

 

● No unnecessarily high flow temperature

 

No unnecessarily high domestic hot water 

temperature (note and follow local regulations)

 

Do not open windows with gap / tilt open 

(continuous ventilation), but instead open wide for 

a short time (shock ventilation).

 

Always ensure that the controller settings are 

correct.

4.2  Maintenance

Wipe down the outside of the device only using a damp 

cloth or cloth with mild cleaning product (washing up 

liquid, neutral cleaning product). Do not use any harsh, 

abrasive, acid or chlorine-based cleaning products.

Содержание LWP 450-LUX









































Отзывы: