Alpha-InnoTec LWAV+ 122R3 Скачать руководство пользователя страница 8

Страница: 8 / 44

Subject to change without notice | 83024000bUK – Translation of the original operating manual | ait-deutschland GmbH

There is a risk of cutting your hands on sharp edges

of the unit.

►

Wear cut resistant protective gloves.

The hydraulic connections are not designed for me-

chanical loads.

►

Do not lift or transport the unit by the hydraulic con-

nections.

Transport the packing units preferably with a lift truck,

alternatively with a handcart or by carrying it.

►

Do not tilt the heat pump module by more than 45°.

►

The tensioning straps on the heat pump module

may only be used for carrying by hand.

Transport by crane

►

Transport the packing units to the installation site

in packaged form and secured on a wooden pallet.

40-50°



Package leaflet

Transport with a lift truck

►

Transport the packing units to the place of instal-

lation in packaged for, and secured on a wooden

pallet.

Unpacking

Remove plastic films. Ensure that you do not dam

age the unit.

2. Dispose of the transport and packaging materi-

al in an environmentally sound manner and in ac-

cordance with local regulations.

5 Delivery, storage, transport

and installation

ATTENTION

Damage to the housing and the unit components

due to heavy objects.

►

Do not place any objects on the unit that are heav-

ier than 30 kg.

5.1 Scope of supply

►

Check supplied packages immediately on receipt

for visible signs of damage and completeness.

►

Notify the supplier of any complaints immediately.

The separate package included contains:

● 3 flange seals, 5/4ʺ

● 4 flange seals, 1ʺ

●

1 tube anti-friction agent

●

1 HT sheet, DN 40 mm 87°

●

1 protective cover for plug

●

4 EPP screws

● Documents (operating manuals, ERP data and

labels)

●

Type stickers

In panel packages:

●

Cover, front panel and rear panel

(included in

packing unit 2)

● Side panels with air flow baffles (packing

unit 1)

●

Cover, front panel, rear panel, side panels

5.2 Storage

►

If possible, do not unpack the unit until immediately

before installation.

►

Store the unit protected against:

●

Moisture

●

Frost

●

Dust and dirt

5.3 Unpacking and transport

Notes on safe transport

The unit is heavy (



“Technical data / scope of supply”,

page 17). There is a risk of injuries or material dam-

age if the unit falls down or overturns.

Содержание LWAV+ 122R3













































Результаты поиска

Содержание LWAV+ 122R3

Отзывы:

Alpha-InnoTec LWAV+ 122R3, Руководство по эксплуатации, Страница: 8 / 44

Результаты поиска

Содержание LWAV+ 122R3

Отзывы: