23
We reserve the right to modify technical specifications without prior notice.
83054300dUK
© ait-deutschland GmbH
The heat pump system will be commissioned by cus-
tomer service personnel authorised by the manu-
facturer. A charge is made for commissioning!
SAFETY TEMPERATURE LIMITER
A safety temperature limiter is built into the electric
heating element (depending on model). In the event of a
malfunction in the heat pump or air in the system, check
whether the reset button of the safety temperature lim-
iter has tripped. If this is the case, push in the button.
1 Safety temperature button on
electric heating element
2 Reset button
Dismantling
DANGER!
Danger of fatal injury due to electric
shock!
Electrical connections may be installed
only by qualified electricians.
Before opening the unit, disconnect the
system from the power supply and secure
it from being switched back on!
DANGER!
Only qualified heating or cooling system
technicians are allowed to remove the unit
from the system.
DANGER!
Only qualified cooling system technicians
are allowed to dismantle the unit and its
components.
ATTENTION
Recycle or provide for proper disposal of unit
components, refrigerants and oil in accordance
with the applicable regulations, standards and di-
rectives.
REMOVAL OF THE BUFFER BATTERY
ATTENTION
Before scrapping the heating and heat pump reg-
ulator, remove the buffer battery on the proces-
sor board. The battery can be removed using a
screwdriver. Dispose of battery and electronic
components in keeping with environmental con-
siderations.
