7
Subject to change without notice | 83054000dUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Installation and assembly
Observe the following when performing all work:
NOTICE.
Always comply with applicable accident pre-
vention regulations, statutory regulations, ordi-
nances and directives.
INSTALLATION LOCATION
ATTENTION
Install the unit only indoors.
The installation area must be frost-free and dry. It must
fulfill applicable local regulations.
Dimensional drawing and installation plan for re-
spective unit model.
TRANSPORT TO INSTALLATION LOCATION
To avoid damage during transport, you should transport
the unit to the final installation location in its original
packaging (with angle bracket on the wooden pallet), us-
ing a lifting truck.
CAUTION!
Several people are required to transport
the unit. Do not underestimate the weight
of the unit.
Overview “Technical data/scope of delivery”,
“General unit data” section.
CAUTION!
Unit is not fastened to the wooden pallet.
The unit can tip when being lifted down
and during transport with a lifting truck.
This can result in personal injury and dam‑
age to the unit.
– Take suitable precautionary measures
to eliminate the danger of tipping.
If it is not possible to transport the unit to the final in-
stallation location using a lifting truck, you can also
transport the unit using a hand truck.
ATTENTION
Never use components and hydraulic connec-
tions on the unit for purposes of transport.
ATTENTION
Do not damage the components and hydraulic
connections under any circumstances.
DANGER!
The strap attached to the back of the unit
is an aid for tipping the unit onto a hand
truck! Always secure the unit on the hand
truck with a tension belt!
Do not lift or transport the unit using only
the strap!
– The strap could break
– Persons could be injured
– Persons beneath the load could be fa‑
tally injured
– The unit and other objects could be
damaged!
CAUTION!
Wear safety gloves.
INSTALLATION
CAUTION!
Several people are required to install the
unit. Do not underestimate the weight of
the unit.
Proceed as follows at the installation location:
Set unit on a solid and level, preferably sound-insu-
lated surface…
Mount feet…
ATTENTION
Moving the unit without the feet mounted can
damage the floor.
