(continued)
900-0131-01-00 Rev A.vsd\FNDC Adv\2012-03-21
©2012 OutBack Power Technologies. All Rights Reserved.
Page 10
NOTE:
The values shown in this illustration
will vary depending on the model of inverter.
ADV/DC/BAT----------P03
battery capacity
110 amphours
TOP INC DEC ADV
ADV/DC/PAGE1
choose category
ADV BAT SHUNT PG2
ADV/DC/SHUNT--------P03
shunt A mode enabled
DOWN EN DIS TOP
ADV/DC/SHUNT--------P03
shunt B mode enabled
DOWN EN DIS TOP
ADV/DC/SHUNT--------P03
shunt C mode disabled
DOWN EN DIS TOP
ADV/DC/SHUNT--------P03
shunt setup complete
TOP ADV MAIN
ADV/DC/PG2
choose category
PG1 CHARGE AUX PG3
ADV/DC/CHARGE
return amps 10.4
DOWN INC DEC TOP
ADV/DC/CHARGE
battery voltage 26.0
DOWN INC DEC TOP
ADV/DC/CHARGE
parameters met time
1 minutes
DOWN INC DEC TOP
ADV/DC/CHARGE
charge factor 93%
DOWN INC DEC TOP
ADV/DC/AUXCONTROL
currently MAN-OFF
DOWN OFF AUTO ON
ADV/DC/AUXCONTROL
high volts 29.0 Vdc
DOWN INC DEC TOP
ADV/DC/AUXCONTROL
low volts 22.0 Vdc
DOWN INC DEC TOP
ADV/DC/AUXCONTROL
SOC high 90%
DOWN INC DEC TOP
ADV/DC/AUXCONTROL
SOC low 59%
DOWN INC DEC TOP
ADV/DC/AUXCONTROL
high set point delay
1 minutes
DOWN INC DEC TOP
ADV/DC/AUXCONTROL
low set point delay
1 minutes
DOWN INC DEC TOP
ADV/DC/AUXCONTROL
invert logic YES
DOWN YES NO TOP
ADV/DC/AUXCONTROL
aux parameters
complete
TOP ADV MAIN
Accessing the Advanced Menu:
MAIN--------------------
3:02:14P
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
ADV/PASSWORD------------
Enter the password
132
ENTER INC DEC EXIT
ADV/PASSWORD------------
Enter the password
141
ENTER INC DEC EXIT
ADV--------------------
choose device
FX CC DC MATE
MAIN--------------------
3:02:14P
SUM STATUS SETUP ADV
ADV/DC/PG3---------P03
choose category
PG2 RESET CLR MAIN
ADV/DC/RESET-------P03
reset DC to factory
defaults?
NO YES TOP
ADV/DC/CLEAR
clear data log
memory?
YES NO TOP
FLEXnet DC
ADV/DC/CHARGE
charge parameters
complete
TOP ADV MAIN
MAIN-------------------
3:02:14P
SUM STATUS SETUP ADV
To return to the Main
screen at any time:
Press and hold the 2 left soft keys at the same
time. Release when the Main screen appears.
Содержание Out Back Power MATE Series
Страница 1: ...System Display and Controller ...
Страница 14: ...1 3 0 0 1 9 1 9 1 1 ...