63
MAINTENANCE AND TROUBLESHOOTING
Error No.
Error description
Solution
110005
battery_stops_
running_alarm
1.
If the battery is not connected, use a multimeter
to measure whether there is voltage at the battery
terminal.
2.
Restart the inverter to see if the fault still exists.
If it still exists, please call the service center.
110006
overtempera-
ture_alarm
1.
Try to lower the ambient temperature.
2.
Make sure that the inverter is installed according
to the manual and there is no shelter around the
machine.
3.
After the inverter is powered off and waiting for
30 minutes, then restart it. If the fault still exists,
please call the service center.
10.2.2
Battery Protection Description
LED Indictor
Error Code
LED
Display
Description
Troubleshooting
Yellow LEDs
flash once per
second.
1
Temperature
difference
Wait for automatical recovery.
If the problem is not be solved
yet
,
please call the service
center.
3
Hardware error
Stop discharging and charging
until this code is eliminated and
wait for the temperature to
drop.
4
Low
temperature
discharge
Stop discharging until this code
is eliminated and wait for the
temperature to rise
5
Over-current
charge
Wait for automatical recovery.
If the problem is not be solved
yet, please call the service
center.
6
Over-current
discharge
8
Cell
overvoltage
9
Cell under
voltage
Stop discharging and call the
service immediately.
11
Low
temperature
charge
Stop discharging until this code
is eliminated and wait for the
temperature to rise.
