background image

12 SERVICE HISTORY

DETAILS OF BOILER INSTALLATION

Date of Installation: ......................................................................

Name of Installer: .........................................................................

Address: ......................................................................................

....................................................................................................

....................................................................................................

....................................................................................................

Postcode: ....................................................................................

Telephone No: .............................................................................

Boiler Serial Number: ...................................................................

(see data label on inside of left hand case panel)

DETAILS OF BOILER SERVICE HISTORY

Manual compiled and designed by Publications 2000, Tel (01670) 356211

Alpha Therm Limited.
Goldsel Road, Swanley, Kent BR8 8EX
Tel: (01322) 669443
Fax: (01322) 615017

Part No. 920.308.1

These instructions have been carefully prepared but we reserve the right to
alter the specification at any time in the interest of product improvement.
© Alpha Therm Limited 1999.

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

.............................................................................................

................................

................................

................................

................................

Date of Service

Details of Service

Service Engineer

.......................................

.......................................

.......................................

.......................................

11/99/D100

Содержание Alpha 500E





































Отзывы: