OWNER'S MANUAL OF PNEUMATIC FERTILIZER
SPREADER ASF
Old Cod.Q00A00140
New Cod. -
INSTALLATION
- 9
Copyright ©2009 della Alpego spa ® -Tutti i diritti sono riservati. È espressamente vietata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego spa
D02624
Indicates the danger caused by pressurised oil if
the hydraulic pipes break. Consult the instruction
manual before repairing the hydraulic system
D02608
Indicates the danger of entanglement while
working on the universal joint shaft. Do not
approach the shaft while it is rotating
D02615
Indicates the need to switch off the tractor and
remove the ignition key during maintenance
operations
D02616
Indicates the position of a support leg that must
always be locked into place when the machine is
not being used to keep the machine stable
D10238
Indicates that the hydraulic hose driving the ½”
turbine must be connected to the tractor
hydraulic connection having priority delivery
D10239
Indicates that the hydraulic ¾” return hose must
be connected to the tractor oil tank, and that the
return counter-pressure can not exceed 5 Bar
4. INSTALLATION
4.1. TRANSPORT O
The machine can easily be transported even over long distance with suitable means of transportation: lorries,
trailers, train cars etc.
The loading and unloading of the machine can be rather dangerous operations, unless they are
performed with the utmost care: have all unauthorized personnel leave the area; clear and
circumscribe the loading area; check that the available means of transportation are in good
working order and strong enough for the job at hand.
It is also necessary to make sure that the area of operation is free and that there is enough escape
space, i.e. a free and safe area where it is possible to move quickly should the machine fall down.
Said operations are to be performed exclusively by personnel trained to perform this type of work.
Before beginning the loading operation make sure that the available means is certified for this type of transportation
and that it is strong enough to support the weight of the machine. To this end see CHART OF TECHNICAL DATA
(see Par. 2.3) for the weight of the machine.
This chart is also useful to check the possibility of transit of the machine through narrow passages.
