OWNER'S MANUAL OF PNEUMATIC FERTILIZER
SPREADER ASF
Old Cod.Q00A00140
New Cod. -
SAFETY REGULATIONS
- 8
Copyright ©2009 della Alpego spa ® -Tutti i diritti sono riservati. È espressamente vietata la ristampa o l’uso non autorizzato per iscritto da parte di Alpego spa
3.5. TRAVELLING ON ROADS
If necessary, the machine can be transported on the roads while hitched to the tractor. The operator must check,
compare and adapt the implement so that it fully complies with the Highway Code in force in the country of use. Bear
in mind the following recommendations:
1. Comply with the instructions in this manual when you hitch the machine to the tractor;
2. The machine must remain blocked and raised from the ground during transport.
3. You must take all possible precautions and comply with the pertinent laws in order to safeguard
yourselves and others.
4. Projecting parts and those beyond the width of the tractor must be fitted with the relative protections.
5. The entire implement must be equipped with its own lighting system complete with flashing lights and
indicators.
6. Warning boards to indicate the projecting parts of the implement must be affixed where necessary.
7. The braking distance and steering capacity of the tractor are influenced by the weight of the machine
hitched to its power lift. When driving round bends, take great care and allow for the action of the
centrifugal force that shifts the machine’s center of gravity.
8. Comply with the load limits on the axles.
9. Bear in mind the limits imposed by the overhang and projection from the sides of the tractor.
3.6. CLOTHING
Always wear protective clothing without any loose parts that could entangle in the moving components. In addition
always remove watches, rings, necklaces etc. that could cause the same danger. Gather long hair into a ponytail.
If requested by current user country norms, the machine operator should wear
suitable protection systems: goggles, gloves, helmet, shoes, etc
3.7. ECOLOGY
Respect the regulations in your country regarding the use and disposal of lubricating products, maintenance
operations and machine cleaning. Carefully follow the instructions given on the packaging of the products used.
Respect current standards for machine scrapping.
3.8. SAFETY SIGNALS
The various adhesives on the machine are there to highlight the source of danger. Observe them carefully and
follow the indications for using the machine safely. The labels should be kept clean and be legible – if damaged they
should be replaced.
FIGURE
CODE
INDICATIONS
D02612
You MUST read the user and maintenance
manual and the safety instructions before using
the equipment. The manual and the instructions
must be followed during use
D02627
Indicates the hooking point for machine
transportation