Almost Heaven Saunas Virta HL6U1 Скачать руководство пользователя страница 4

Страница: 4 / 8

VIRTA HEATER INSTALLATION MANUAL

PAGE 4

Touchpad

• The touchpad should be mounted indoors in a dry area.

• The touchpad connects to the power unit with the provided 20’ data cable. If you need a longer data cable for your application,

you may purchase one directly from Almost Heaven Saunas.

CONNECTING YOUR HEATER TO POWER

Please note, the power unit provided with your sauna is rated for single-group connection. The instructions below are for single-

group connections only.

Incoming Power

First, you will need to bring power to your power unit. Remove the power unit’s cover and pry out the appropriate knockouts that

will allow the wiring to enter and exit the unit.

Note: for visual purposes the wiring images you will see in this manual do not utilize the knockouts.

Connect the power cord to the appropriate terminals, with the two hot lines connecting to the left-most L1 and L2 terminals, and

the ground connecting to the ground terminal. A neutral line is not needed - this is only required if a light or ventilation fan is

connected to the power unit, an application that is not available in the U.S. market.

Power Unit Wiring

Содержание Virta HL6U1








