Almagia ALMAG+, Руководство по эксплуатации

Страница: 16 / 48

16
ALMAG+
When using the device as intended, pay a en on to the correct deployment of
the emi er according to recommenda ons of the treatment procedure (i.e. the
direc on of the traveling pulsed magne c
fi eld and the exposure to the northern
magne c pole). All the procedures include the exposure to the northern magne c
pole from the inductor coils indicated with
« Ν » le er on the coil bodies i.e. the coil
is to be applied to the body with the end where « Ν » is located.
The traveling pulsed magne c fi eld is to be directed from the 1st inductor coil to
the 4th inductor coil when «spline» emi er con fi gura on is used, namely:
The coil directly connected to the control unit is referred to as the 1st coil. Where
the matrix emi er con fi gura on is used, the inductor coils queuing and the direc-
on of the traveling pulsed magne c fi eld are similar.
When using the four inductor coils con fi gured in the form of «spline», the spline
fastener (herea er the fastener) is required. The fastener fi xes the coils together
preven ng them from traveling rela ve to each other.
Place the inductor coils into the fastener stepwise according to the «spline» ar-
rangement as follows:
1 2 3 4