ALMAC MULTI-LOADER 2.5, Перевод оригинальной инструкции

Страница: 77 / 121

PAGE
77 ALMAC s.r.l.
5.3 Emergency movements from hydraulic block
Warning: this operation must be performed only by qualified technicians trained
by Almac S.r.l.
In the event that there is a malfunction of the control unit but it is possible to
switch on the electric motor, the movements of the machine can then be
performed directly from the hydraulic block.
To perform the movements it is necessary: to release (by turning anti-clockwise)
the safety valve 3 and screw (by turning clockwise) the valves 1 and 2 (provided
with a lead seal).
ATTENTION: If valve 3 is not reset to the fully engaged position by pressing
and turning clockwise (hear a click) with the valves 1-2 all unscrewed
(restore the lead seal), the safety of the machine will be compromised.
ATTENTION: As the operations are performed near the tracks, there is a risk
of crushing.