ALMAC MULTI-LOADER 2.5, Перевод оригинальной инструкции

Страница: 23 / 121

PAGE
23 ALMAC s.r.l.
Type of terrain, geomorphological
characteristics
Permitted surface pressure
Loose non-compact soil In general, not solid; requirement for
particular measures
Mixed, compact soil, sand and gravel
2.0 kg/cm² 0.2 N/mm²
Semi-solid cohesive soil 1.0 Kg/cm² 0.1 N/mm²
Solid cohesive soil 2.0 Kg/cm² 0.2 N/mm²
Hard cohesive soil 4.0 Kg/cm² 0.4 N/mm²
Rock, concrete, road paving suited to the
transit of heavy vehicles
Over 10.0 Kg/cm² over 1 N/mm²
2.7 Safety indications on the use of the travel function
The instructions given below must be followed.
•
Make sure movements are done on flat, sturdy ground.
•
Make sure that there are no hollows or ridges in the floor and that there is
enough room for the machine to pass through.
•
Make sure that there are no bystanders or obstructions in the surrounding
area before moving off
•
Do not CHANGE DIRECTION on kerbs, rocks or appreciable differences in level
(> 10 cm) when driving the machine. In this case, always proceed
perpendicularly to the obstacles.
•
If you must drive up a slope, do not change direction when the ground
changes from flat to sloping. If this is absolutely necessary, perform the
manoeuvre gradually.
•
Do not drive along the edge of slopes or over uneven ground with one track
horizontal and the other slanting or partially raised (>10°) as this will