Allworx Allworx 10x, Руководство по установке

Страница: 9 / 19

10x Installation Guide
3. Place the brackets so that the smaller faces extend away from the bottom of the unit as shown in Figure 4.
Figure 4: Wall Mount Bracket Installation
4. Install the mounting brackets on each side of the chassis using four 8-32 flat head screws.
5. Secure the unit to the wall using appropriate hardware.
Caution: The Allworx server must be securely mounted to the wall to avoid equipment damage or
personal injury.
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be
trademarks or registered trademarks of their respective owners.
Revised: February 7, 2007
Page 6