Allworx Allworx 10x, Руководство по установке

Страница: 11 / 19

10x Installation Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be
trademarks or registered trademarks of their respective owners.
Revised: February 7, 2007
Page 8
6 Accessories
6.1 Music-On-Hold
Connect the output from your music system to the server using a 3.5mm stereo plug line-in audio adapter
cable. Insert the male cable end into the audio connector labeled “In” on the front panel. Only the audio
channel associated with the tip of the plug is used.
6.2 Overhead Paging
Connect the server to the input of your paging system using a 3.5mm stereo plug audio cable. Insert the male
cable end into the audio connector labeled “Out” on the front panel.
6.3 FAX Machine
To enable the sharing of a CO line between a fax machine and outgoing calls, a fax machine may be directly
connected to the server on any of the phone extension ports. Just as when connecting an analog phone, this
requires configuring the extension using the administrative interface. See the Call Routing section of the
Allworx 10x System Administration Guide for instructions. If you have a high volume of fax traffic, it may be
prudent to connect the CO line directly to the fax machine via the premise wiring.