Bedienungsanleitung
Operation manual
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
www.alluris.de
Page 26 of 34
5.1.2. Software FMI_Analyze
The software FMI_Analyze (part no: FMI-975) allows real-time visuali-
zation of your measuring results. The captured force vs. time or force
vs. distance diagrams can be evaluated online and real time with
threshold values, envelope or failure lines, windows with entrance
and leaving definition. Further the software allows to manage results
easily and to generate reports.
FMI_Analyze can be utilized also to configure the three additional di-
gital outputs according to specific applications.
5.1.3. Software FMI_Analyze Pro+
The software FMI_Analyze Pro+ (part no.: FMI-976) offers basically all
analyzing functions as FMI_Analyze. Furthermore the software packa-
ge allows to control the optional motor for test stands series FMT-220
and enables the setting of parameters for straight forward test stand
applications.
5.1.4. Software COM-Bridge
The software COM-Bridge allows direct data transfer from force gauges
with USB interface to PC applications (e. g. Procella/Q-DAS, specific
applications etc.).
Data transfer can be configured to be carried out via S-key on the in-
strument or an external foot switch. In the latter case connect a foot
switch (part no.: FMI-936) with Hirose connector to the Hirose-socket
(see p. 27 chapter 5.2.1 Foot switch for data tansfer)
.
Note: Activate the memory function before using the COM-Bridge soft-
ware
(see p. 20 chapter 4.4.3 Saving single values (Single))
.
Software COM-Bridge
Screenshot interface
Software FMI_Analyze
Interface:
Evaluation protocol
Interface:
Measuring
