Alltech Keenan MechFiber350, Руководство оператора

Страница: 12 / 69

KEENAN
MechFiber350 and 370 Operator’s Manual
12
Revision D01 21
st
May 2019
Note: the machine is supplied with a top knife guard, which can be found inside the
driveline covers of the mixer wagon.
7. Use a suitable and secure ladder for access to and from the mixer wagon.
Note: The ladder at the rear of the machine is provided only as a means of viewing
the ration and should not be used to enter the mixing chamber.
8. Always maintain three points of contact while entering, exiting and moving within
the mixing chamber of the machine.
9. When entering the base of the body, it is recommended that you cover the body
blades in the vicinity of where the work will be carried out.
10. When removing trapped objects, be aware that some machine components may
move unexpectedly when cleared.
11. Take extreme care when moving around inside the body, as surfaces may be
slippery.
SODA GRAIN: Additional safety instructions and warnings are covered and available in the
soda grain leaflet, which should be read carefully before soda-treating grain. When finished
treating grain, clean out any remaining material in the mixing and/or auger chamber by loading
in 200
–300 kg of silage or 50 kg of straw, and allow the machine to mix before unloading in the
normal manner. Note: When mixing soda grain, the maximum gross load that can be mixed in
the KEENAN MechFiber350 is 5,000 kg and the maximum for the KEENAN MechFiber370 is
6,000 kg.
The soda grain process can be completed using a KEENAN mixer, but before
treatment on your farm, make sure you are adhering to local animal feed legislation and health
and safety guidelines involving the treatment of grain.
WARNING:
Failure to follow the safety guidelines above may lead to accident or injury.
Blade
When entering the mixing
chamber, always fit the safety
beading that is provided for the
top knife.
Figure 3b: Top knife protection
Figure 3a: Body blade and blade
cover
Figure 4: Breakaway safety brake
When entering the mixing
chamber, always fit the safety
beading that is provided for
the top knife.
Blade