All
SportSystems, Inc.
©
2021
MEASURING AND CUTTING EMT POLES
Note:
Corner brackets add about 3” to the depth, height and width of your enclosure, thus poles are cut 3”
shorter than the enclosure dimension as shown below. If you have questions about the number of poles
needed for custom sized bays call us at 877-847-1280 for assistance.
EMT Poles for standard sized bays:
NOTE:
SkyBridge™ and SkyRailPlus™ customers should first review the respective
for
these products. If you ordered SkyBridge™ you will need
one less
EMT pole than what is shown
below. If you ordered the SkyRailPlus™ you will need
two less
EMT poles than what is shown below.
Hitting Bay Size
Number of
10’ long poles
Cut poles as follows:
SuperBay™
10W x 9H x 5D
10 poles
Height:
4 poles
cut to 8’9” ea.
Width:
4 poles
cut to 9’9” ea.
Extender: none needed
Depth:
2 poles
cut into 4 pieces 4’9” long.
SuperBay™
12W X 9H x 5D
11 poles
Height:
4 poles
cut to 8’9” ea.
Width:
4 poles
at 10’0” (no cuts needed)
Width Extender:
1 pole
cut into 4 pieces 1’9” long.
Depth:
2 poles
cut into 4 pieces 4’9” long.
SuperBay™
14W x 9H x 5D
12 poles
Height:
4 poles
cut to 8’9” ea.
Width:
4 poles
at 10’0” (no cuts needed)
Width Extender:
2 poles
cut into 4 pieces 3’9” long.
Depth:
2 poles
cut into 4 pieces 4’9” long.
SuperBay™
16W x 9H x 5D
14 poles
Height:
4 poles
cut to 8’9” ea.
Width:
4 poles
at 10’0” (no cuts needed)
Width Extender:
4 poles
cut to 5’9” ea.
Depth:
2 poles
cut into 4 poles 4’9” ea.
Poles for custom sized bay:
If you have ordered a custom dimension bay use the information below to calculate the number of
10ft EMT poles needed and cut them to the proper length:
HEIGHT
POLES
You will need 4 ea 10ft EMT poles - each pole cut 3 inches shorter than your finished
enclosure height.
WIDTH AND
EXTENDER
POLES
For bay 10ft or less - you will need 4 ea 10ft EMT poles - each pole cut 3 inches
shorter than your finished width.
For bays 11 to 15ft - you will need 5 ea 10ft EMT poles - cut one pole into 4 sections
to extend the other 10ft poles to your finished width minus 3” inches. (i.e. a 13ft wide
bay would require 4 ea 10ft poles plus 4 ea extender poles ea 2ft 9in long).
DEPTH
POLES
For bays 5 feet or less - you will need 2 ea EMT poles - cut poles into four sections
ea 3 inches shallower than finished depth. For bays greater than 5 feet - you will
need 4 ea EMT poles - cut each pole 3 inches shallower than your finished depth.
Page 5 of 39
Last Revised 8/5/21
