Auto-Pure Mini Operation Manual
Chapter 4 Operations
20
Table 3 Project interface function
Icon
Name
Function
Move
Long press this key to drag step sequence
Select circle
Select step
Step
New steps
Protocol code Generates the code for the selected protocol
Preview
Preview current protocol
After the new protocol is completed, it will automatically enter the new
interface of the protocol steps, and you can add, delete and copy the steps,
preview, move and edit the parameters of the steps and generate the
two-dimensional code of the protocol.
Add step: New procedure steps, you can use the App's own step name, or
customize the edit according to personal habits;
Preview: Like protocol preview, the main thing is to generate a preview after
the protocol steps are edited;
Move: Used to adjust the sequence of steps;
Delete and copy: The circle on the right side of the protocol interface is the
selection box. You can select a single or multiple steps to delete and copy.
When delete step, a prompt box will be displayed to confirm again.;
Protocol code: After the protocol is created, it is used to generate the QR code
of the protocol.
